Dishwasher Making Noise When Water Circulates

If your dishwasher is making noises while the water circulates, there are several things you can check to determine whether the noises are normal or a sign of a more serious problem. Learn what to look for and how to fix the problem. A dishwasher may have a single pump or a combination of circulation and drain pumps. If the noises are coming from the dishwasher’s water pump, it’s possible that there is a clogged or broken impeller. If this is the case, you should replace the impeller. Depending on the type of pump you have, the impeller is often removable.


If your dishwasher is making a noise while water is circulated, it may be caused by wear on the pump seals. The water helps to keep these seals quiet and lubricate them. If the noise persists, contact the manufacturer’s factory service. They should be able to give you service if necessary.

Normal dishwasher noise is a low humming sound caused by the drain pump and fans. Some models use fans to dry the dishes, which can also cause a humming sound. While it is not a cause for concern, the sound could be a sign that the water supply to the dishwasher has been compromised.

If the noise continues even after a service, it may be a problem with a mechanical part of the dishwasher. The parts that may be responsible for this problem include the chopper blade section, circulation pump, and other motor assemblies. You will have to replace or repair these parts, but they are usually no more expensive than buying a new dishwasher.

A thumping sound is also possible. The dishwasher may be sloshing the water in the drain pipe. If this is the case, make sure to check the pump and replace it as soon as possible. Otherwise, the thumping sound is likely caused by the thumping pump’s impellers.

If a thumping sound continues, the drain hose is loose or has become damaged. In some models, it can be necessary to adjust the hose to ensure that water is flowing as it should. If the hose is loose, check it for kinks. If it is, you will have to take the dishwasher out so you can inspect the drain hose.

Another cause of rattling sounds is improperly loaded dishes. You should load your dishwasher with enough space between the dishes to prevent them from rattling. A loud dishwasher can also be caused by a malfunctioning water inlet valve. This valve opens and closes to allow water to circulate through the dishwasher. If the valve is noisy, you should get it replaced by a professional repair service.

If the noise continues to occur, you may have a worn-out water inlet valve. This can cause your dishwasher to make a loud humming or buzzing sound while the water is filling the tub. The valve is easy to replace. First, turn off the water supply to the dishwasher. Then, remove the dishwasher from the power source and replace the valve.

dishwasher making noise when water circulates
dishwasher making noise when water circulates

The other possible cause of this noise is a clogged or broken impeller. The impeller is a small plastic blade that is spun by a motor. If it is bent or warped, it may scratch or scrape against the pump housing. In some cases, it may be necessary to replace the impeller.

Another common cause of noise is faulty installation. If the dishwasher is not installed correctly, the water pipes in the dishwasher may become loose and cause the dishwasher to make a banging noise. It is best to ensure that the dishwasher is properly installed by placing it on a strong and flat surface. You can also place a piece of wood under the dishwasher for additional support.


If you have a noisy dishwasher, you may want to investigate the cause. Sometimes, a dishwasher makes noises when the water circulates because of a clog in the drain pump. If the drain pump is clogged, it will struggle to empty the dishwasher. If you notice a gurgling noise when the water circulates, you should contact a professional repair company.

A noisy pump or motor will make a high-pitched noise while running a cycle. To determine which part is causing the noise, you can check for clogs in the filter or the pump assembly. If the noise persists, try to replace the motor or pump assembly.

Other common causes of dishwasher noises include the seal and bearing ring on the spray/wash arms. If they are both worn or loose, they may be the cause of the noise. To inspect the bearing ring, you may need to remove the spray/wash arms. If it’s loose or damaged, you can replace it. However, you may need to remove the spray/cleaning arms first to ensure that the seal is intact.

Another common cause of dishwasher noises is a clogged drain hose. This clogged drain hose can impede the spray arms and water circulation. The hose can also cause noises by rubbing against stored items in the cabinets. If the noise persists, you might need to consult a professional.

If the noise occurs periodically, the problem may be related to the water inlet valve. The water inlet valve controls how much water is allowed into the dishwasher. If the valve is worn out, it can produce loud buzzing noises. In most cases, you can replace the valve by turning off the power and water supply to your dishwasher.

In other cases, a defective wash pump motor can cause noises and decreased spray pressure. To resolve this problem, you may need to replace the pump with a new one. Then, the noise should stop. In some cases, you may also need to replace the impeller.

A thumping or banging noise can also be a symptom of a malfunctioning drain pump. It is important to replace this component as soon as possible. Otherwise, the noise will continue to persist. If you continue to experience this problem, contact a professional repair shop for assistance.

dishwasher making noise when water circulates

Another cause of this noise is an incorrect loading of dishes. Dishes that are too closely loaded may rattle as the water circulates. If you are unsure of what is causing the noise, check the dishwasher’s Owner’s Manual for recommendations. Also, if you are unsure of how to load the dishwasher, consult the Owner’s Manual for loading tips and recommendations.

The noise may also be caused by debris lodged in the chopper blade area. During a cycle, debris can easily lodge in this area and clog the drain. Getting the debris out of the pump will help prevent the noise from coming back.


If your dishwasher is making noises, you may need to repair the water inlet valve. The water inlet valve controls how much water is able to enter the dishwasher and initiates the wash cycle. When the valve malfunctions, it can result in a high-pitched buzzing or squealing sound. It may be a simple matter of replacing the water inlet valve.

If the noise persists, you may need to get a professional repair service. Depending on the cause, the noise can indicate a clogged filter or a seized drain pump. Alternatively, the noise can also indicate a faulty fan or motor. It is a good idea to contact the manufacturer of your dishwasher for assistance with this issue.

Another problem that may be the cause of this noise is an improperly installed dishwasher. If the dishwasher is not set up on a flat and sturdy surface, it can cause vibrations and banging noises. To avoid this, always ensure that the dishwasher is properly installed and that you have a flat, sturdy surface. You can also place a 3/4-inch piece of wood under it to provide additional support.

If the noise is coming from the dishwasher’s chopper, debris could have become lodged in the area. To access the blade, remove the lower spray arm to access it. In case the blade is damaged, a professional service can clean or replace it. If the noise persists, you can also check the inlet valve to see if it has worn out.

You may need to replace the pump. A defective pump will not be able to pump water properly. Moreover, a defective pump will not provide enough water for the wash cycle and will make noises. If this is the case, a new pump will save you money and time.

There may also be a faulty drain valve. Sometimes, the drainage valve solenoid can get stuck in the dishwasher, making it buzzing and spitting water out. In addition, the circulation pump is another part that can cause a dishwasher to make noises during a wash cycle. Wear and tear on the circulation pump will result in a loud buzzing or humming sound.

Other parts of the dishwasher that can cause a noise are the spray arm seal and wash arm bearing ring. These two components support the spray and wash arms. A worn-out bearing ring or seal could be the culprit. To inspect these parts, you may need to remove the spray/wash arms and inspect them.

dishwasher making noise when water circulates

Another common cause for a noisy dishwasher is loading too many dishes too close to each other. This can cause dishes to rattle and other lightweight objects to fall out of the rack. When trying to locate the cause of the noise, you should consult the Owner’s Manual for more detailed instructions.

Scott Friedman